Configuring HP DCE Cells
Configuring Cells Using dce_config
98.Return to previous menu
99.Exit
selection:
2. From the DCE Configuration Menu, choose Initial Cell Configuration:
DCE Configuration Menu (on hostname) selection: 1 (Initial Cell Configuration)
S:****** Configuring initial cell.
Initial Cell Configuration (on hostname)
1.Initial Security Server
2.Initial CDS Server
3.Initial DTS Server
98.Return to previous menu
99.Exit
selection:
3. Configure the Security Server:
Initial Cell Configuration
selection: 1 (Security Server)
S:****** Configuring initial Security Server
4.If this is your very first cell configuration, or if you have previously run REMOVE, answer n to the following question. If you are reconfiguring a cell, answer y:
Do you want to first remove all remnants of previous DCE configurations for all components (y/n)? You should do so only if you plan on reconfiguring all existing DCE components now:
(n)
5. Enter a cell name:
Enter the name of your cell (without /…), xyz.abc.com
S:****** Stopping rpcd...
S:****** Starting dced...
S:****** Initializing dced...
S:****** Since the glbd daemon was restarted and/or
llbd and rpcd were replaced by the endpoint
mapper, NCS applications may need to be
restarted.
6. At the following prompt, enter any string and press < RETURN>.
Enter keyseed for initial database master key:
Planning and Configuring HP DCE 1.7 |