Administering HP-UX IPQoS

Administering HP-UX IPQoS Operating States

If the command is successful it reloads and re-initializes the HP-UX IPQoS Filtering module, restores the state and configuration information saved at the time HP-UX IPQoS was disabled (when /sbin/init.d/ipqos stop was run), and sets the log level to the value set in the IPQOS_LOG_LEVEL parameter in the /etc/rc.config.d/ipqos file.

If the command fails, examine the displayed error messages to determine possible next steps.

Chapter 5

85