HP-UX IPQoS Configuration Files

Policy Blocks

Packets not sent on a VLAN, but that are regulated by a policy that specifies a VLAN priority, are given a VLAN header. This header contains a VLAN ID of zero (0) and the specified VLAN priority.

You cannot specify this attribute if the relevant adapter is not a VLAN.

NOTE

For HP-UX IPQoS to be able to set the VLAN priority, you

 

must ensure that the VLAN_PRI_OVERRIDE parameter for that

 

VLAN is set to IP_HEADER in /etc/rc.config.d/vlanconf.

 

For more information on HP-UX VLAN usage, refer to Using

 

HP-UX VLANs available at http://www.docs.hp.com.

 

 

Chapter 4

75