HP UX IPQos Software manual 127

ipqosadmin Quick Reference

ipqosadmin Syntax Quick Reference

ipqosadmin Syntax Quick Reference

Table C-1 provides a quick reference summary of ipqosadmin actions and corresponding syntax.

Table C-1 ipqosadmin Syntax Quick Reference

Verify an HP-UX IPQoS Configuration File

-v[erify] -f[ile] filename [-verbose]

Required parameter: -filefilename

Default for optional parameters: None

Actions: Verifies the HP-UX IPQoS configuration file specified. By default, information messages are suppressed.

Load an HP-UX IPQoS Configuration File

-l[oad] -f[ile] filename [-verbose][-a[bort]-c[ontinue]]

Required parameter: -filefilename

Default for optional parameters: -abort

Actions: Verifies, and if verification succeeds, loads the HP-UX IPQoS configuration file specified. By default, information messages are suppressed, and warnings are fatal.

Unload an HP-UX IPQoS Configuration File

-u[nload] [-s[ilent]]

Required parameter: None.

Default for optional parameters: None.

Actions: If presently filtering, removes configuration and changes state to ENABLED, but NOT FILTERING. Sends message to stdout indicating current state after command executes (unless -silent) is specified.

Appendix C 127