ipqosadmin Quick Reference

ipqosadmin Syntax Quick Reference

Table C-1

ipqosadmin Syntax Quick Reference (Continued)

Show State Information

[-st[ate] [-s[ilent]]]

Required parameter: None.

Default for optional parameters: None.

Actions: By default, displays current state of HP-UX IPQoS to stdout. Message is suppressed if -silentis specified. The state message is one of the following:

—HP-UX IPQoS is DISABLED

—HP-UX IPQoS is ENABLED but NOT FILTERING

—HP-UX IPQoS is ENABLED and FILTERING

Show Configuration Information

-sc-showconfig [-t[ext]-c[onf]]

Required parameter: None.

Default for optional parameters: -text

Actions: If state is ENABLED and FILTERING, displays the active configuration information. If state is ENABLED but NOT FILTERING or DISABLED, there is no active configuration, and except for the state message, no other information is displayed.

By default, or by specifying -text, the configuration is displayed in simple text form. If -confis specified, the configuration is displayed in a syntax format usable for configuration file source input.

128

Appendix C