Chapter 12 Avaya P330 Layer 3 Features
VLAN number, and
7Create an IP interface name. Type:
Router(configure)# interface
Press Enter.
The Router(configure-if:<interface-name>)# prompt appears.
8Assign the IP address and network mask of the IP interface you have created. Use the command:
Press Enter
9Assign a vlan to the IP interface you have created. Type: Assign a vlan to the IP interface you have created. Type:
Router(configure)# interface
Press Enter.
10Type exit and press Enter. This returns you to the prompt:
Router(configure)#
11If the management station is not on the same subnet as the switch, configure a default gateway (static route). Use the command:
ip
12Save the configuration changes by typing copy
Obtaining and Activating a License Key
In order to benefit from Layer 3 Routing functionality, it is required that you either purchase a Layer 3 preconfigured
Each Certificate is specific for:
•The module type.
•The required feature.
•The number of devices.
After you purchase a Routing Licence Key Certificate, you must obtain and activate a Routing License Key.
112 | Avaya |