Avaya P332G-ML manual Safety AC Version, Safety DC Version, EMC Emissions

Chapter 3

Safety

•UL for US approved according to UL195O Std.

•C-UL(UL for Canada) approved according to C22.2 No.950 Std.

•CE for Europe approved according to EN 60950 Std.

•Laser components are Laser Class I approved:

—EN-60825/IEC-825 for Europe

—FDA CFR 1040 for USA

Safety - AC Version

•Overcurrent Protection: A readily accessible Listed safety-approved protective device with a 16A rating must be incorporated in series with building installation AC power wiring for the equipment under protection.

Safety - DC Version

•Restricted Access Area: This unit must be installed in Restricted Access Areas only.

•Installation Codes: This unit must be installed in accordance with the US National Electrical Code, Article 110, and the Canadian Electrical Code, Section 12.

•Conductor Ampacity: Per UL 1950, Annex NAE (NEC Article 645-5(a)), the branch-circuit conductors supply shall have the ampacity of not less than 125 percent of the total connected load. For input leads use at least 18 AWG copper conductors.

•Overcurrent Protection: Per UL 1950, Annex NAE (NEC Article 240-3), a readily accessible listed branch-circuit overcurrent protective device rated maximum 10A must be incorporated into the building wiring.

EMC Emissions

Emissions

Approved according to:

•US - FCC Part 15 sub part B, class A

•Europe - EN55022 class A and EN61000-3-2

•Japan - VCCI-A

Immunity

Approved according to:

•EN 55024 and EN61000-3-3

8 Avaya P332G-ML User’s Guide