6 | Product Description | AXIS 2400/2401 Admin Manual |
Product Description
Read the following information to familiarize yourself with the AXIS 2400/2401, making particular note of where the connectors and indicators are located.
AXIS 2400 Front Panel
Status Indicator
The
•green - the indicator flashes briefly and momentarily displays orange during the
•red - the indicator will display red only if a problem with the AXIS 2400 has occurred
•orange - flashes orange when reset- ting the factory default settings.
Network Indicator
After completion of the startup and self test routines, the
•yellow - indicating net- work activity on a 10Mbps Ethernet network
•green - indicating network activity on a 100Mbps Fast Ethernet network
•red - indicating no physical connection to the network.
DIP Switches
A corresponding line termination switch for each of the supported video outputs. All units are shipped with the line termination enabled for each supported video input; that is, with the DIP switches set in the
AXIS
STATUS | NETWORK | POWER |
Power Indicator 
The Power indicator is normally lit while power is applied. If it is not lit, or it flashes, there is a problem with the AXIS 2400 external power source.
Serial Number 
Located on the underside label of the AXIS 2400, the serial number is identical to the Ethernet address of the unit.
Video Server
VIDEO 1 | VIDEO 2 |
|
| VIDEO 3 | VIDEO 4 | |
| 1 2 3 4 |
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 75 |
| ON |
| ||
http://www.axis.com
Control Button
This button is recessed within the product cas- ing. Using a suitably pointed object, press this button to restore the factory default settings, as described in Network Settings, on page 20.
Video Inputs
Accommodates up to 4 separate video sources (VIDEO 1- VIDEO 4) simultaneously.
Each supported video input is terminated using a coax/BNC connector. Physical connections made using RG59, 75 Ohm coax video cable; have a rec- ommended maximum length of 800 feet (250 meters).
