HP V3702VU, V3523TU, V3700 Power connector cable, h. Speaker assembly see Speaker assembly on page

Power connector cable

Description	Spare part number
Power connector cable for use in computer models with Intel processors	448629-001
Power connector cable for use in computer models with AMD processors	430462-001

Before removing the power connector cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 53).

5. Remove the following components:

a. Hard drive (see Hard drive on page 54)

b. Wireless module compartment cover (see WLAN module on page 57)

c. Optical drive (see Optical drive on page 64)

d. Keyboard (see Keyboard on page 66)

e. Switch cover (see Switch cover on page 69)

f. Display assembly (see Display assembly on page 71)

g. Top cover (see Top cover on page 80)

h. Speaker assembly (see Speaker assembly on page 92)

Remove the power connector cable:

1. Disconnect the power connector cable (1) from the system board.

2. Remove the power connector (2) from the clip built into the base enclosure.

Reverse this procedure to install the power connector cable.

94 Chapter 4 Removal and replacement procedures