5.Use a pointing device, the arrow keys, or touch the screen to select Set DriveLock Password, and then follow the
6.Use a pointing device, the arrow keys, or touch the screen to select an internal hard drive, and then follow the
7.Use a pointing device, the arrow keys, or touch the screen to select Disable protection.
8.Type your master password, and then follow the
9.To save your changes and exit Computer Setup, click the Save icon and then follow the on- screen instructions.
– or –
Select Main > Save Changes and Exit, and then follow the
Using Computer Setup Automatic DriveLock
In a
NOTE: A BIOS Administrator password must be set before you can access the Automatic DriveLock features.
Entering an Automatic DriveLock password
To enable an Automatic DriveLock password in Computer Setup, follow these steps:
1.Turn on or restart the computer, and then press esc or hold down the volume button while the "Hold the Volume Down button to enter the BIOS Startup Menu" message is displayed at the bottom of the screen.
2.Press or tap f10 to enter Computer Setup.
3.Use a pointing device, the arrow keys, or touch the screen to select Security > Hard Drive Tools > Automatic DriveLock, and then follow the
4.Enter the BIOS Administrator password, and then follow the
5.Use a pointing device, the arrow keys, or touch the screen to select an internal hard drive, and then follow the
6.Read the warning. To continue, select YES.
7.To save your changes and exit Computer Setup, click the Save icon and then follow the on- screen instructions.
– or –
Select Main > Save Changes and Exit, and then follow the
Removing Automatic DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
Using passwords 55
