Chapter 6 Network

Configure the DHCP Relay Mode as Remote VPN Relay Agent

STEP 1

STEP 2

STEP 3

STEP 4

From the LSM menu, select Network > DHCP Server. Then, click the DHCP Relay tab.

On the DHCP Relay page, check Enable DHCP Request Relaying to enable DHCP Relay.

Select Remote DHCP Relay Agent.

With this configuration, the device listens for DHCP requests from its LAN and forwards them to a Central DHCP Relay.

From the VPN Tunnel drop-down list, select the tunnel that will be used to relay the requests from the Remote DHCP Relay agent to the Central DHCP Relay agent.

Note If the VPN Tunnel list is empty, navigate to VPN > IPSec/IKE Status and configure an IPSec tunnel.

STEP 5 Click Apply to save the configuration.

Static Reservations

Static Reservations allow you to assign a particular IP address to a device such as a printer or DNS server. In the LSM, you can create and manage static reservations from the Static Reservations page (Network > DHCP Server). From this page, you can complete the following tasks:

•View a list of current static reservations

•Create a new reservation

•Delete a reservation

Note If you are using DHCP Relay, any LAN devices attached to the Remote VPN Relay agent that are not using DHCP must be configured as static mappings.

174 X Family LSM User’s Guide V 2.5.1