IPS Digital Vaccine (DV) Filters
STEP 6
STEP 7 STEP 8
On the View Filter page, you can also add or remove the filter from Security Profiles using the check boxes in the Security Profiles table. After making changes, click Save.
In the Filters List table, select the filter or filters to edit:
•To select a single filter, click 
to add the filter to the Security Profile.
•To select multiple filters, select the check box for each filter. Then, click the Add Selected Filters button at the bottom of the Filters page.
The Security Profiles page displays with the selected filters in the Advanced Options - Filters table as shown in the following figure.
To edit the filter settings, click the filter name, or the pencil icon.
On the Edit Filter page in the Action/State section, select Use Category Settings or Override . If you select Override to use a different action set for the filter, do the following:
STEP A
STEP B
Select the Override radio button in the Parameters section.
Check Enabled to enable the filter, or clear the check box if you want to disable the filter.
STEP C Choose an Action from the
If the action for the filter is Recommended and you do not change it, the filter may remain disabled even when you select the Enabled check box. This happens because the recommended setting for the filter state is disabled. To enable a filter configured in this manner, you must change the action from Recommended to another option.
STEP 9
STEP 10
Optionally, set adaptive filter settings for flow control. In the Adaptive Filter Configuration State section, select one of the following:
•Use adaptive configuration settings — Applies the global adaptive filter settings
•Do not apply adaptive configuration settings to this filter — Removes any global adaptive filter settings for this filter
Optionally, define IP address exceptions for the filter. For details, see “Configure Filter Limits/ Exceptions based on IP Address” on page 34.
STEP 11 Click Save.
X Family LSM User’s Guide V 2.5.1 | 33 |
|
|