Preferences

Preferences

Use the IPS Preferences page (IPS > Preferences) to configure settings related to the Threat Suppression Engine and filtering performance. From this page you can complete the following tasks:

Reset all filters to the factory default settings

Configure timeouts, logging, and other settings for the Threat Suppression Engine

Change the global settings for the Adaptive Filter function

View the most recent filters affected by the Adaptive Filter configuration

The following figure shows the IPS Preferences pane.

Figure 3–9: IPS Preferences

Reset Filters

To restore IPS filters and associated settings to the factory default settings, use the Reset Filters option available on the Preferences page.

CAUTION The Reset Filter action restores all filters back to their recommended Category Settings. You will lose any filter customizations made in the Security Profiles. You will also lose any user-created Action sets, rate limits, and traffic thresholds, etc. You cannot undo this action.

Reset the IPS Filters to Factory Default Settings

STEP 1

STEP 2

From the LSM menu, select IPS > Preferences.

On the IPS Preferences page, click Reset Filters. Then, click OK on the confirmation pop-up.

X Family LSM User’s Guide V 2.5.1

57