IPS Digital Vaccine (DV) Filters
The following figure shows the Category Settings table.
Figure
Click Show Advanced Options if the Advanced Options table is not displayed.
STEP 4 Modify the settings as required:
•In the State field for the Category group, clear the check box to disable all filters in the group, or check it to enable all filters in the group.
•In the Action field, select the Action Set to be used for all filters in the group.
The Recommended Action Set is the system default for all category groups. If this action is selected, each filter in the group is configured with the recommended settings. Filters within the group may have different settings for State and Action.
The following action set selections are available for each Filter Category:
o For all Application Protection filters, the selection list includes all available actions sets. o For Infrastructure Protection filters, the selection list includes all available actions sets.
o For Performance Protection filters, the selection list includes all available block action sets.
STEP 5 After making the desired changes, click Save (at the bottom of the Security Profile page).
Edit Individual Filters to Override Category Settings
For the best system performance, we recommend that you use global Category Settings and the Recommended action set for all DV filters. However, in some cases, you may need to override the category settings and recommended action for individual filters due to specific network requirements, or in cases where the recommended settings for a filter interact poorly with your network.
Filter override settings specify custom settings to be applied to the filter in the Security Profile. Once a filter has been customized, it is not affected by the global Category Settings that apply to all other filters in the category group. For details, see “Edit Individual Filter Settings” on page 32.
X Family LSM User’s Guide V 2.5.1 | 31 |
|
|