HP Z800 manual Lucid ADA 88192 Converter Settings for Remote Control

Lucid ADA 88192 Converter Settings for Remote Control

You must configure the following settings to control the converter remotely. Any setting not listed here either has no effect with the application or can be set through the audio preferences of the application.

Menu	Menu Item	Comment
ADAT	ADAT INs: SRC ON
	ADAT INs: SMUX OFF
AES	AES IN1+2: SRC OFF
	AES IN3+4: SRC OFF
	AES IN5+6: SRC OFF
	AES IN7+8: SRC OFF
Analog	IN1+2: SoftClip OFF
Analog INs: SoftClip	IN3+4: SoftClip OFF
	IN5+6: SoftClip OFF
	IN7+8: SoftClip OFF
Meter	Clip Detect: 3	3 is the recommended setting
System	Route Unit: 8	8 is the recommended setting
Miscellany

Lucid ADA 88192 Converter Settings for Local Control

You must configure the following settings to control the converter locally. Any setting not listed here either has no effect with the application or can be set to any of the values available for it.

Menu	Menu Item	Comment
ADAT	ADAT INs: SRC ON
	ADAT INs: SMUX OFF
AES	AES IN1+2: SRC OFF
	AES IN3+4: SRC OFF
	AES IN5+6: SRC OFF
	AES IN7+8: SRC OFF
Analog	IN1+2: SoftClip ON
Analog INs: SoftClip	IN3+4: SoftClip ON
	IN5+6: SoftClip ON
	IN7+8: SoftClip ON
Analog	set each input channel to a value in
Analog INs: Gain	the range -95.5 to +31.5 dB
Analog	set either -10 or +4 for each output
Analog OUTs: Level	channel
Meter	Clip Detect: 3	3 is the recommended setting
Route	For analog audio:	If these options do not appear, verify that Route Unit
	AES INs --> ADAT OUTs	(in the System, Miscellany menu) is set to 8.
	Analog INs --> AES OUTs
	AES INs --> Analog OUTs

Lucid ADA 88192 Converter Settings for Remote Control 27