HP Z800 manual Audio Keywords in the Visual Effects and Finishing Configuration File

Menu	Menu Item	Comment
	For digital audio:
	AES INs --> ADAT OUTs
	AES INs --> AES OUTs
	AES INs --> ANALOG OUT
Sync	Internal OFFExternal AES 1+2	External AES 1+2 is the recommended setting.
System	Route Unit: 8
Miscellany

Audio Keywords in the Visual Effects and Finishing Configuration File

There are two keywords in the software initialisation file (by default, init.cfg) that must be uncommented and set to the correct values to ensure Discreet Native Audio works properly. The first, Audiodevice, enables Discreet Native Audio. The second, MidiDevice, determines whether control of the Lucid converter is remote or local.

NOTE This does not apply to Lustre.

Keyword:	Setting:
Audiodevice	AJA
MidiDevice	If you are using local control of the converter, comment out this keyword.
	If you are using remote control of the converter, uncomment the keyword, set the
	serial port parameter to /dev/ttyS1 and leave all other parameters set to their default
	value.

For additional information on these keywords and help setting them, see the Autodesk Visual Effects and Finishing Installation and Configuration Guide.

28 Chapter 5 Setting Up Audio Hardware