HP manual Configuring the, Workstation BIOS, HP Z800 BIOS Settings on page

Configuring the	7
Workstation BIOS

Topics in this chapter:

■HP Z800 BIOS Settings on page 41

■Restoring BIOS to Default Factory Settings on page 42

■Updating your System BIOS on page 43

HP Z800 BIOS Settings

After wiring the workstation and before installing Linux, turn the workstation on and check the BIOS version and BIOS settings.

WARNING If BIOS settings are not set up correctly before installing Linux, you will need to reinstall the OS.

The certified BIOS version for your workstation is 1.06.

Make sure the BIOS version number that appears on screen while booting the workstation matches the certified version. If the versions do not match, update the BIOS to the certified version, after configuring BIOS settings. BIOS update instructions are at the end of this chapter.

To adjust system BIOS settings, press F10 while booting the workstation.

The following table lists the Autodesk certified BIOS settings. Items not listed are set to their default factory settings. See Restoring BIOS to Default Factory Settings on page 42 for instructions on restoring your BIOS settings to factory defaults.

BIOS Menu	Submenu	Item	Value
Storage	Storage Options	SATA Emulation	RAID+AHCI

41