Huawei V100R001 manual Select Enable for WAN connection, Select INTERNET from the Service list

5.Enter the user name and password that are provided by the network operator in the User name and Password text boxes.

6.Keep the default settings of other parameters.

7.Click Submit.

After completing the preceding configuration steps, you can begin browsing the Internet.

You only need to perform the preceding operations on a computer once. The next time you boot up your computer, you can browse the Internet without performing the same configurations.

2.3.2Accessing the Network through the PPP Dial-Up Software on Your Computer

If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In addition, you need to perform dial-up operations on your computer upon each startup. To configure the HG533 and your computer for the network access, do as follows:

Step 1 Set the working mode of the HG533 to Bridge.

1.In the navigation tree on the left of the web-based configuration utility, choose Basic > WAN.

2.Select Enable for WAN connection.

3.Select INTERNET from the Service list.

4.Select Bridge from the Connection type drop-down combo box.

5.Keep the default settings of other parameters.

6.Click Submit.

Step 2 Install and configure the PPP dial-up software on your computer.

The PPP dial-up software is pre-installed on certain computer operating systems. To create a dial-up connection, do as follows (taking the Windows XP operating system as an example):

1.Choose Start > All Programs > Accessories > Communications > Network Connections.

10