Safety and Warning
10.LOCATION
•Place the product indoors to avoid exposing it to lightning, rain or sun.
•Do not place it near a radiator or heat register.
•Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR.
•Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface.
•If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting.
•Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall.
•A falling product can cause serious injury to a child or adult, and serious damage to the appliance.
11.LIGHTNING, STORM, or NOT IN USE
•Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and
12.EXTRANEOUS OBJECTS
•Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
13.REPLACEMENT of PARTS
•When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitution may result in additional damage to the unit.
Warning
1.To avoid damage of the power cord or plug;
•Do not modify or process the power cord or plug arbitrarily.
•Do not bend or twist the power cord.
•Make sure to disconnect the power cord holding the plug.
•Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting.
•The mains plug, as a disconnection device, shall remain readily accessible by the user.
2.To avoid electrical shock;
•Do not open the main body.
•Do not insert metal or inflammable objects inside the product.
•Do not touch the power plug with wet hands.
•Disconnect the power cord in case of lightning.
3.To avoid damage of product;
•Do not use the product when it is out of order. If you continue to use the product when defective, serious damage can be caused to it. Make sure to contact your local product distributor if the product is out of order.
•Do not insert metal or alien substance into the slots for the modules or Smartcards. It may cause damage to the product and reduce its life span.
GB 4
