Humax HDCI-2000 manual Symbol Rate, Transmission, Modulation, Installation

10. Installation

Symbol Rate

1.Select Symbol Rate using the button.

2.Enter the symbol rate from 2 to 45 Ms/s in DVB-S(Transmission) setting.

3.Enter the symbol rate from 10 to 30 Ms/s in DVB-S2(Transmission) and QPSK(Modulation) setting.

4.Enter the symbol rate from 10 to 31 Ms/s in DVB-S2(Transmission) and 8PSK(Modulation) setting.

Transmission

1.Select Transmission using the button.

2.Select one option form DVB-Sand DVB-S2using the OK or button.

FEC

1.Select FEC using the button.

2.Select one option among Auto, 1/2, 2/3, 3/4, 5/6 and 7/8 using the OK or button in DVB-S(Transmission) setting.

3.Select one option among Auto, 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9 and 9/10 using the OK or button in DVB-S2(Transmission) and QPSK(Modulation) setting.

4.Select one option among Auto, 3/5, 2/3, 3/4, 5/6, 8/9 and 9/10 using the OK or button in DVB-S2(Transmission) and 8PSK(Modulation) setting.

Modulation

1.Select Modulation using the button.

2.Select one option form QPSK and 8PSK using the OK or button.

Note: When Transmission is set to DVB-S, Modulation is disabled. The values for Symbol Rate and FEC differ depending on the value of Modulation.

Refer to the table below.

GB 64