Humax HDCI-2000 manual Transponder, Reset Position, Frequency, Polarization, Installation

10. Installation

•Reset Position

You can restore the position saved at motor antenna to the default setting.

1.Select Reset Position using the button and press the OK button.

2.Pop-up will appear. Select OK and press the OK button to restore all values saved at motor antenna to default setting.

3.Please wait during the motor antenna is restored.

Note: Reset may not be activated depending on the condition of the antenna. Repeat the procedure above if necessary.

3.Transponder

1.Select Transponder in Search Channel using the button and press the OK button.

2.Select an option for Transponder using the OK or button.

3.To add another transponder, select User Define from the list.

4.Add Transponder screen will appear. Enter the values for

Frequency, Polarization, Symbol Rate, Transmission, FEC and Modulation.

5.Select Save and press the OK button to complete.

**

Frequency

1.	Select Frequency using the	**
		button.
2.	Enter the frequency using the NUMERIC(0-9)buttons.

**

Polarization

1.Select Polarization using the button.

2.Select one option among Auto, Horizontal and Vertical using

the OK or button.

**

GB 63