Manuals / Brands / Computer Equipment / Switch / Humminbird / Computer Equipment / Switch

Humminbird 531906-1EN_A Network Menu tab, The Network menu tab includes the following menu options:

1 43

Download 43 pages, 2.07 Mb

Network Menu tab

When units are connected on the network, the Network menu tab is added to the Main Menu system.

The Network menu tab includes the following menu options:

Unit Name: Displays the name of the control head. The default Unit Name is based on its model number and serial number. To change the Unit Name, see Customize the Unit Name.

Network Source Setup: Opens the Network Source Setup dialog box. Use this dialog box to review all the sources connected to the network. You can also select sources for Local or Shared networking with this dialog box.

Share Navigation Data: Turn on this menu option to share navigation information (waypoints, routes, and tracks) on the network. When Share Navigation Data is turned on, the network chooses one GPS receiver to synchronize the position data and display navigation on both control heads (see GPS and Navigation Data Overview and Share Navigation Data).

Configuration Overview

Contents

Page Thank You Page Table of Contents Introduction 1. Installing an Ethernet Connection 2. Powering On 3. Configuring the Ethernet Network Troubleshooting Humminbird® Accessories Contact Humminbird® Page Introduction 1.Connect two Humminbird® units together 2.Power On 3.Configure your Humminbird® Ethernet Network 4.Share Navigation Data 1. Installing an Ethernet Connection Ethernet Cable Information Control Heads Required Cables Connect the Control Heads 1.Confirm that the control heads are powered off A. Two 700 Series™ Units 2.Connect the AS EC 10E to each round connector on the AS EC QDE cables B.One 700 Series™ Unit & One 800/900/1100 Series™ Unit 3.Connect the AS EC QDE cable connector to the AS EC 10E cable connector 4.Hand-tightenthe screw nut(s) on each cable to secure the connection C. Two 800, 900, or 1100 Series™ Units 3.Hand-tightenthe screw nut(s) on each cable to secure the connection Page 2. Powering On 1.Press the POWER/LIGHT key 3. Configuring the Ethernet Network 1.Network Setup Overview 2.Customize the Unit Name 4.Understand the Shared and Local Menu Settings 5.Share Navigation Data Page Network Menu tab Customize the Unit Name 1.Main Menu: Press the MENU key twice. Select the Network Menu tab Open the Network Source Setup Dialog Box Sonar Source Overview Shared Sonar Menu Settings Select a Sonar Source Page Change the Sonar Source Page Temperature Source Overview Shared Temperature Menu Settings Select a Temperature Source Select Temperature Sources for Digital Readout Boxes 5.Repeat steps 2 - 4 to select a different temperature tab for more information Change the Temperature Source Page GPS and Navigation Data Overview Select a GPS Source Page Change the GPS Source Share Navigation Data Shared Navigation Menu Settings Share Man Overboard (MOB) Navigation Page Restore Defaults (Setup Menu Tab) Use this menu choice with caution Fishing System Doesn’t Power Up Fishing System Defaults to Simulator with a Transducer Attached Humminbird® Accessories Page Contact Humminbird® Contact the Humminbird® Customer Resource Center in any of the following ways: By Telephone: By e-mail: