Open the Network Source Setup Dialog Box
The Network Source Setup dialog box displays all of the sources connected to the network. The sources may be shared on the network or operating locally with their connected control head.
Open the Network Source Setup Dialog Box
1.Main Menu: Press the MENU key twice. Select the Network tab.
2.Select Network Source Setup. Press the RIGHT Cursor key.
3.Status Tab: Allows you to review the selected data sources on the network. If a source is grayed out, the source is selected, but the network cannot detect the connection.
4.Select a Source: Review each source section in this manual to select a data source for each control head and understand how a shared source will affect your fishing system.
Status Tab
Temperature
sources
available from
transducers
and accessories
GPS Receiver
Navigation Data is shared on the network
Network Source Setup Dialog Box
Source Tabs
The selected
transducer
connection is lost
or not found.
Data | Selected | If the Unit Name is changed, the |
Categories | Sources | new name will be displayed here. |
Column | Column | See Customize Unit Name. |
Configuration Overview | 12 |