Temperature Graph
1100 Series™
Red marks indicate where the temperature source changed.
Change the Temperature Source
To change the temperature source after the network has been configured, open the Network Source Setup dialog box to change the temperature sources at any time (see Select a Temperature Source). Network settings are saved even after the unit is powered off.
•Temperature Graph: When the temperature source is changed, the temperature graph displays a red mark to show where the temperature source was changed.
NOTE: The Temperature Graph menu setting is not shared on the network. It is a local menu setting.
•If the control head cannot detect the set temperature source, the digital readout box will be empty. Open the Network Source Setup dialog box to assign a temperature source to the digital readout box. See Select a Temperature Source for details.
Temperature Sources | 22 |