Change the GPS Source

To change the GPS source after the network has been configured, open the Network Source Setup dialog box to change the GPS sources at any time. Network settings are saved even after the unit is powered off.

If the control head cannot detect the set GPS receiver, the control head will display an error message so that you can reset the GPS source as follows:

•If the shared GPS receiver is not detected, follow the on-screen instructions to switch to the GPS connected to the control head (Local).

•If the local GPS receiver is not detected, follow the on-screen instructions to switch to another GPS receiver in the network. If there is more than one GPS receiver in the network, the Network Source Setup dialog box will display, and you can select a different GPS source. See Select a GPS Source for details.

Finding the GPS Source

700 Series™

If the control head cannot detect the shared GPS Receiver set in the network, follow the on-screen instructions to change the GPS source. In the above illustration, the control head is switching to the locally-connected GPS receiver. Press the LEFT Cursor key to select No, or press the RIGHT Cursor key to select Yes.

27

GPS Sources