Customize the Unit Name

Each control head is assigned a Unit Name, which is based on its model number and serial number. The unit name is also displayed next to a source name in the Network Source Setup dialog box so you can see where the source is connected.

When you’re first setting up your network, you may want to change how the unit name is displayed, so it is easier to identify each unit on the network.

Unit Name Dialog Box

 

 

Name Field

Select Save and press

Use the 4-WAY Cursor

the RIGHT Cursor key.

Control key to change the

 

 

unit name.

Customize the Unit Name

1.Main Menu: Press the MENU key twice. Select the Network Menu tab.

2.Select Unit Name. Press the RIGHT Cursor key. The unit name is displayed in the dialog box.

3.Use the 4-WAY Cursor Control key to select the Name field. You can change the control head display name as follows:

Move within the Name Field: Press the RIGHT or LEFT Cursor key.

Change a Letter or Number: Press the UP and DOWN Cursor keys. All upper and lower case letters are available (including digits 0-9 and some punctuation characters).

Save: Use the 4-WAY Cursor Control key to choose Save, and then press the RIGHT Cursor key.

11

Configuration Overview