Temperature Digital Readouts

1100 Series™

The Temperature Digital Readout positions correspond with the T1, T2, T3, and T4 tabs in the Network Source Setup dialog box.

Select Temperature Sources for Digital Readout Boxes

1.Open the Network Source Setup dialog box.

2.Select the tab for T1, T2, T3, or T4: Press the RIGHT or LEFT Cursor keys. Each tab represents a digital readout position on the screen.

NOTE: The temperature readout positions may vary with the Humminbird® model. See the Views section and Select Readouts section of your Humminbird® Operations Manual for more information.

3.Scroll: Press the DOWN or UP Cursor keys. The selected source is highlighted in white.

4.Select: Press the ENTER/INFO key or the RIGHT Cursor key. The check mark indicates that the source is being used by the control head.

5.Repeat steps 2 - 4 to select a different temperature tab.

Temperature Sources

20