6.Save: Press the EXIT key to close the dialog box. Follow the on-screen instructions to save your changes. To select No, press the LEFT Cursor key. To select Yes, press the RIGHT Cursor key. Network settings are saved even after the unit is powered off.

Local Setup: To use separate temperature sources for each control head, repeat steps 1 - 6 on each control head until you’ve set a temperature source for each unit and each digital readout.

Shared Setup: To use the same temperature sources on more than one control head, repeat steps 1 - 6 on each control head and select the same temperature sources on all units.

Menu System: When you select a temperature source, the control head updates with the corresponding menu options and views. If the source is shared between control heads, it may take a moment for the data to synchronize. See Temperature Source Overview for more information.

Temp 1 tab sets the temperature source for digital readout 1 on the screen.

The control

head detects

all of the

temperature

sources in the

network.

Selecting a Temperature Source for Digital Readout Position 1

Selected

The check mark indicates the source is used by the control head.

Empty

The empty box indicates the temperature data is available but not selected. You must select a temperature source to display its

 

 

data on the control

Unit Name

Unit Model

head.

Temperature Source

Column

Number

Type Column

(see Customize

Column

(from transducers or accessories)

the Unit Name)

 

 

21

Temperature Sources