www..reelsche93x Man
SYSTEM STATUS
Use System Status to view system connections and to conduct a unit
System Status by powering your 900 Series™ off.
The following screens are displayed in turn when you press the VIEW button when using System Status:
•Self Test
•Accessory Test
•GPS Diagnostic View (937c DF Combo and 937c Combo models only).
SELF TEST
Self Test displays results from the internal diagnostic self test, including unit serial number, Printed Circuit Board (PCB) serial number, software revision, total hours of operation and the input voltage.
Self Test Screen
ACCESSORY TEST
Accessory Test lists the accessories connected to the system.
Accessory Test Screen
NOTE: The speed accessory will be detected only if the paddlewheel has moved since your 900 Series™ was powered up.
GPS DIAGNOSTIC VIEW | (With 937c DF Combo and 937c Combo models only) |
GPS Diagnostic View, which is only available when a GPS Receiver is attached to you 900 Series, shows a sky chart and numerical data from the GPS receiver. The sky chart shows the location of each visible GPS satellite with its satellite number and a signal strength bar. A dark grey bar indicates that the satellite is being used to determine your current position. A light gray bar indicates that the satellite is being monitored, but is not yet being used.
47
