Depth Alarm, Fish ID Alarm, Low Battery Alarm | Humminbird 957C

Depth Alarm

Depth Alarm sounds when the depth

becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International models only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the 900 Series™ detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

Off

All

Large/Medium

Large

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the 900 Series™. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1.Highlight Low Battery Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

98

Image 106

Humminbird 957C, 917C manual Depth Alarm, Fish ID Alarm, Low Battery Alarm

Contents

Page Thank You Table of Contents Upper Range Quad Layout Delete All Images Start RecordingDelete Image Delete Recording Navigation Menu Tab Views Menu Tab Page Series Introduction How Sonar Works Peak to Peak measures power output at the highest points DualBeam Plus Sonar Universal Sonar QuadraBeam Plus SonarHow GPS and Cartography Work Page Installation Overview Software Updates Accessory BusMulti-Media Card MMC/SD Slot Basic installation tasks that you must perform include Control Head InstallationInstalling the GPS Receiver if included Gimbal Mounting the Control Head Washer Gimbal Knob Gimbal Bracket Mounting Screws Cables Routed Directly Beneath Mounting Bracket Cables Routed Behind Mounting Bracket Connecting the Control Head Power Cable to the Boat Transducer Installation Transom Transducer Installation Locating the transducer mounting location Preparing the Mounting Location To maintain the sonar signalPopping the transducer out of the water Assembling the Transducer and Initial Mounting Knuckle to form one continuous line on the assembly Inserting the Pivot Bolt Adjusting the Initial Transducer Angle Routing the Cable Connecting the Cable Screw Test and Finish the Installation Perform a trial installation Inside the Hull Transducer InstallationThickness, as well as the installation position and process Locate transducer mounting location Trial installation Determine the transducer mounting location Route the cable Permanently mount the transducer Trolling Motor Transducer Installation Are included with the bracket Trolling Motor Transducer Options GPS Receiver InstallationIf you have… Then use Follow these steps to stem mount the GPS receiver Stem Mounting with an Existing 1 14 Thread StemAbrasion Access Under Mounting Location No Access Under Mounting Location Finish Routing the Cable Check GPS Receiver Operation Testing the System Installation To test the installation Getting Started Using Your 900 Series Powering Up the Control Head What’s On the Sonar Display Triplog Real Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation POWER/LIGHT Key Key Functions View Key Menu Key WAY Cursor Control Key View Preset keysExit Key Goto Key Info KeyMark Key Goto Key has multiple functions, depending on the situation Views Zoom +/- KeysViews and Readouts Sonar View Sonar View Sonar Zoom View Sonar Zoom View Split Sonar View Split Sonar View Snapshot and Recording View Page Recording Slider Bar Recording Playback Side Beam View Only with QuadraBeam Plus transducer 555 Bird’s Eye View Bird’s Eye View Chart/Bird’s Eye Combo View Chart/Bird’s Eye Combo View Chart/Chart Combo View Chart/Chart Combo View Chart View Chart View with Active Cursor Chart/Sonar Combo View Chart/Sonar Combo View Chart Orientation Viewing Cartography Navigation Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved Tracks Man Overboard MOB Navigation MOB Navigation Menu System Start-Up Options Menu Normal Simulator System Status Simulator Exit Normal operation by powering your 900 Series offNormal Operation System Status Accessory Test Self Test GPS Diagnostic View Sonar X-Press Menu Active Side Split Position Sensitivity Upper Range Lower Range Chart Speed Quad Layout Bottom Range Cancel NavigationBottom Lock Sonar Colors Navigation X-Press Menu Waypoint Name Cursor to Waypoint Save Current Route Save Current TrackClear Current Track Skip Next Waypoint Remove Target Cancel MOB NavigationTo Cancel MOB Navigation Remove Grid Most recently-created waypoint Start Recording Stop Recording Delete All Images Delete ImageTo delete an image Delete Recording Delete All Recordings Playback Speed Pings Per SecondTo specify playback speed Stop Playback Sonar Menu Tab Beam Select Fish ID+ Fish ID Sensitivity Bottom View Zoom Width To change the 455 kHz Sensitivity setting KHz Sensitivity Depth Lines Surface Clutter Noise Filter Max Depth Transducer Select Water TypeColor Bar Temperature Graph Navigation Menu Tab Current Track Saved Tracks Routes WaypointsWaypoints Submenu contains the following menu choices North Reference Trackpoint Interval Trolling Grid RotationTrack Min Distance Course Projection Line Track Color RangeMap Datum Export All Nav Data Continuous Navigation Mode allows you to Continuous Navigation ModeChart Menu Tab Delete All Nav Data Chart Detail Level Map Borders Navaids on Birds Eye View Lat/Lon GridSpot Soundings Shaded Depth Set Simulation Position Set Map Offset Alarms Menu Tab Clear Map Offset Fish ID Alarm Depth AlarmLow Battery Alarm Aux Temp Alarm Temp Alarm Off Course Alarm Arrival Alarm Drift Alarm Alarm Tone Units Depth Setup Menu TabUnits Temp Units Speed User ModeUnits Distance Language Off Triplog Position Voltage Aux. Temperature Triplog ResetRestore Defaults Select ReadoutsPage Aux Temp Offset Depth OffsetTemp Offset Daylight Saving Time Speed CalibrationLocal Time Zone Position Format Time Format Date Format Digits Format Nmea Output Sonar Views Menu TabPage Accessories Menu Tab Using Screen Snapshot 113 Troubleshooting Series Doesn’t Power Up Display Problems Control head loses power at high speeds Finding the Cause of Noise Year Limited Warranty Humminbird Service Policy Returning Your Unit for Service Series Accessories Series includePage Specifications Glossary Sonar Terms 123 Glossary Receiver See Transmitter Glossary Glossary Sonar Terms GPS & Navigation Terms Glossary 129 Glossary Glossary Glossary Contact Humminbird