To Select Readouts:
1.Make sure you are in Advanced User Mode, then highlight Select Readouts on the Setup main menu.
2.Use the RIGHT
3.The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or DOWN Cursor keys to select a particular Readout position, then use the RIGHT or LEFT Cursor keys to change what will be displayed at that position. (Aux. Temperature, Course, Depth, Off, Position, Speed, Temperature, Time, Time+Date, Triplog, Voltage, Water Speed)
Depth Offset
(Advanced)
Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boats keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth from the waterline. Enter a negative vertical measurement from the transducer to keel to read the depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Depth Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.
2.Use the LEFT or RIGHT
Aux Temp Offset
(Advanced)
Aux Temp Offset will adjust the aux temperature readout (the temperature on the
To change the Aux Temp Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Aux Temp Offset on the Setup menu.
2.Use the LEFT or RIGHT
Temp Offset
(Advanced)
Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Temp Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.
2.Use the LEFT or RIGHT
106
