MAINTENANCE
Adjusting the parking brake
The parking brake is adjusted as follows:
1.Loosen the locking nuts (1).
2.Tension the cable using the adjuster screw (2) until the play in the cable is taken up.
3.Tighten the locking nuts (1).
4.The parking brake should be checked again after the adjustment has been made.
WARNING!
A poorly adjusted parking brake can result in reduced braking ability and cause an accident.
Adjusting the Parking Brake
Rider 155 AWD
Check that the parking brake is adjusted correctly by placing the machine on a slope with the front and rear axles disengaged. Apply and lock the parking brake. When the machine does not stand still, the parking brake should be adjusted accord- ing to the following.
1.Remove the
2.Loosen the locking nuts (1).
3.Tension the cable using the adjuster screw (2) until the play in the cable is taken up.
4.Tighten the locking nuts (1).
5.The parking brake should be checked again after the adjustment has been made.
6.Assemble the
WARNING!
A poorly adjusted parking brake can result in reduced braking ability and cause an accident.
English – 33
