MAINTENANCE
Main fuse
The fuse is located in a loose holder under the battery case cover, in front of the battery. Type:
Do not use any other type of fuse when replacing. A blown fuse indicates that the mounting has burnt off. Pull the fuse out of the holder when replacing. The fuse is used to protect the electrical system. If it blows again shortly after replacing this is due to a short circuit, which must be rectified before the machine is used again.
Checking the tire pressure
The tire pressure should be 60 kPa (0.6 kp/cm2/8.5 PSI) all round.
To improve driving the pressure on the rear tires can be reduced to 40 kPa (0.4 kp/cm2/5.6 PSI).
The maximum tire pressure is 100 kPa (1.0 kp/cm2/14 PSI).
IMPORTANT INFORMATION
Different tyre pressures on the front tyres will result in the blades cutting the grass at different heights.
Check the engine’s cooling air intake
Clean the air intake grille in the engine cover behind the driver’s seat.
Fold open the engine cover.
Check that the cooling intake is free from leaves, grass and dirt.
Check the air duct, located on the inside of the engine cover, ensure it is clean and does not rub against the cooling air intake.
If the cooling intake is blocked this will interfere with the cooling of the engine, which can damage the engine.
WARNING!
The cooling air intake rotates when the engine is running. Mind your fingers.
Air intake grille
Cooling air intake
English – 39
