8009-122 6017-223 6017-225 6017-226 | Husqvarna 155, 155 AWD

MAINTENANCE

6.Place a foot on the front edge of the cutting unit near the wheel and raise the front edge of the unit to make it easier to remove the lift strut. Engage the strut in the holder.

WARNING!

Observe caution to avoid trapping your hand.

7.Lift off the drive belt (1). Then pull out the pin

(2).

8. Pull the frame forwards and refit the pin.

8009-122

6017-223

1

2

6017-225

6017-226

English – 45

Image 47

Husqvarna 155, 155 AWD manual 8009-122 6017-223 6017-225 6017-226

Contents

Rider 155 Rider 155 AWD Page Contents Introduction Engine Transmission Good ServiceManufacturing Number III. Children Safe operation practices for ride-on mowersGeneral operation II. Slope operation Safe handling of gasoline IV. Service Intended use Travel and transport on public roadsTowing of the machine Xxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Explanation of Symbols and Decals Placards Safety Instructions Safety Instructions Safety Instructions Slope Operation Personal Safety Equipment Children Maintenance General Maintenance Always use protective glasses when handling the battery Transport Customer responsibilities Location of the controls Controls Parking brake Throttle and Choke leverSpeed limiter Lift lever for the cutting unit Cutting unit Refueling Lever for adjustment of cutting heightSeat Cold engine OperationBefore starting Starting the engine Warm engine To remove cables, reverse order To start an engine with a weak battery Running Moving tips MAX1015 Stopping the engine Front Axle Release leverRear Axle Maintenance schedule Maintenance Avoid using a high pressure washer or a steam cleaner Cleaning and washing Right-hand fender Dismantling of the machine hoodsEngine hood Front hood Checking and adjustment of the steering wires Adjusting the Parking Brake Rider 155 AWD Adjusting the parking brake Inspecting the mufﬂer Adjusting the throttle wire Replacing the air filter Replacement of the fuel filter Procedures on contact with acid Check the level of the battery acid Fitting the wrong spark plug type can damage the engine Ignition system Checking the safety system Check the engine’s cooling air intake Main fuseChecking the tire pressure Observe caution to avoid trapping your hand Fitting the cutting unit Checking the cutting unit’s parallelism Removing the cutting unit Adjusting the parallelism of the cutting unit Belt replacement on the cutting unit Service position for the cutting unitPlacing in service position Remove the two support wheels from under the front hood 8009-122 6017-223 6017-225 6017-226 Checking the blades Restoring from service position Removal of BioClip plug Combi Changing the oil LubricationCheck the engine’s oil level Check the transmission’s oil level Change of oil filter General lubrication Lubricating the belt adjuster Problem Procedure Trouble Shooting Schedule Cover ServiceStorage Winter storage Technical Data Technical Data Work done Date, mileage, stamp, sign ServicejournalPre-delivery service After first 5 hours ´z+R23¶5L¨ Page 115 01