Husqvarna 305 manual Movement pattern, Locating the charging station, Security 3 on

2. PRESENTATION

The control panel on the top of Automower® is where you manage all the mower settings. Open the control panel cover by pressing down the STOP button.

When the main switch is set to position 1 for the first time, a start-up sequence begins which includes: language selection, time format, date format and the four-digit PIN code and setting the time and date, see 3.8 First start-up and calibration on page 32.

After this, the selected PIN code must be entered every time the main switch is set to 1. See

6.5 Security (3) on page 47.

Movement pattern

The mower’s movement pattern is irregular and is determined by Automower® itself. A movement pattern is never repeated. This mowing system means the lawn is mown equally without any mowing lines.

Locating the charging station

Automower® runs irregularly until it reaches the guide wire. The mower then follows the guide wire in to the charging station.

The guide wire is a cable that is laid from the charging station towards, for instance, a remote part of the working area or through a narrow passage to be then connected with the boundary wire. For more information, see 3.6 Installation of the guide wire.

14 - English