4. USE
4.6 Adjusting the cutting height
The cutting height can be varied from MIN (2 cm) to MAX (5 cm).
During the first week after a new installation, the cutting height must be set to MAX to avoid damaging the loop wire. After this, the cutting height can be lowered one step every week until the desired cutting height has been reached.
If the grass is long it is appropriate to let Automower® start mowing at the MAX cutting height. Once the grass is shorter, you can gradually lower the cutting height.
To adjust the cutting height:
1.Press the STOP button to stop the mower and open the cover.
2.Turn the height adjustment knob to the required position. The selected position is indicated by the orange column that can be seen by the knob through the window.
•Turn
•Turn clockwise to lower the cutting height.
1 2 3 4 5
English - 37
