9. TROUBLE SHOOTING

Message

Cause

Action

 

 

 

 

 

 

Trapped

Automower® has got caught in

Free Automower® and rectify the

 

something.

reason for it getting trapped.

 

 

 

 

Automower® gets stuck behind a

Check if there are any obstacles

 

number of obstacles.

which make it hard for Automower® to

 

 

move on from this place.

 

 

 

Outside working area

The boundary wire connections to the

Check that the boundary wire is

 

charging station are crossed.

connected correctly.

 

 

 

 

The boundary wire is too close to the

Check that the boundary wire has

 

edge of the working area.

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

The working area slopes too much.

Check that the boundary wire has

 

 

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

The boundary wire has been routed

Check that the boundary wire has

 

the wrong way around an island.

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

Disturbances from metal objects

Try moving the boundary wire.

 

(fences, reinforcement steel) or

 

 

buried cables close by.

 

 

 

 

 

The mower finds it hard to distinguish

Park A in the charging station and

 

the signal from an Automower®

generate a new loop signal via

 

installation close by.

Security -> New loop signal (3-3).

 

 

 

Low battery voltage

Automower® cannot find the charging

Check that the charging station and

 

station.

the guide wire are installed as

 

 

outlined in 3. Installation on page 15.

 

 

 

 

The guide wire is broken or not

Check that the indicator lamp in the

 

connected.

charging station flashes yellow. See

 

 

the solution in 9.2 Indicator lamp in

 

 

the charging station on page 62.

 

 

 

 

The battery is spent.

Replace the battery. See 8.8 Battery

 

 

on page 57.

 

 

 

 

The charging station's antenna is

Check if the indicator lamp in the

 

defective.

charging station flashes red. See the

 

 

solution in 9.2 Indicator lamp in the

 

 

charging station on page 62.

 

 

 

Wrong PIN code

Wrong PIN code has been entered.

Enter the correct PIN code. Contact

 

Five attempts are permitted, and the

the local dealer if you forget the PIN

 

keypad is then blocked for five

code.

 

minutes.

 

 

 

 

60 - English

Page 60
Image 60
Husqvarna 305 manual Trouble Shooting