3. INSTALLATION
The transformer shall be mounted on a vertical surface, for example a house wall. Mount the transformer with screws in the two attachment points. Securing screws are not included. Choose screws suitable for the wall material.
Mount the transformer at a height such that there is no risk the transformer can become submerged in water (minimum 30 cm from the ground). The transformer must never be placed on the ground.
IMPORTANT INFORMATION
The low voltage cable must not be shortened nor extended.
IMPORTANT INFORMATION
Place the low voltage cable so that the blades on the blade disc can never come in contact with it.
Installation och anslutning av laddstation
1.Position the charging station in a suitable spot.
2.Connect the low voltage cable to the charging station.
3.Connect the transformer’s power cable to a 230V wall socket. If the wall socket is outdoors, it is important that the transformer is protected from direct sunlight.
4.Attach the charging station to the ground using the supplied screws. Ensure the screws are screwed all the way down in the countersink.
IMPORTANT INFORMATION
It is not permitted to make new holes in the plate. Only the existing holes may be used to secure the plate to the ground.
min 30cm/12”
English - 19
