![](/images/new-backgrounds/1175454/17545477x1.webp)
Repair Instructions
4.Assemble needle valve M with lever arm Q, shaft L and spring R, and tighten screw P. (Fit the expansion washer). See figure 40.
Fig 40 |
5.Check using a ruler or the like that the lever is level with the assembly plane on the cover. If necessary, the lever arm can be bent, see figure 41.
Fig 41
7.Fit gasket K, the control membrane J and the pump cover H. See figure 42.
8.Carry out a pressure test.
Fig 42
H
J
K