SAFETY INSTRUCTIONS

Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon monoxide, an odourless, poisonous and highly dangerous gas.

Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

Never make adjustments with the engine running.

The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

The blades are sharp and can cause cuts. Wrap the blades or wear protective gloves when handling them.

Check regularly that the parking brake works. Adjust and maintain as required.

8009-467

Never run the machine in an enclosed area.

The mulching function should only be used

 

where better quality mowing is required and in

 

known areas.

 

Reduce the risk of fire by removing grass, leaves

 

and other debris that may have fastened on the

 

machine. Allow the machine to cool before

 

putting it in storage.

 

Transport

 

The machine is heavy and can cause serious

 

crush injuries. Be especially careful when it is

 

loaded in or out of a car or on and off of a trailer.

 

Use an approved trailer to transport the

8010-061

machine. Activate the parking brake and secure

Regularly clean grass, leaves and other debris from the

the machine using approved fasteners, such as

machine.

tension belts, chains or ropes when transporting.

 

Check and observe local road traffic regulations before transporting or driving the machine on roads.

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine during transport. Ensure you secure the machine firmly to the transporting vehicle. Reverse the machine on to the transporting vehicle to prevent it from overturning.

English – 13

Page 15
Image 15
Husqvarna Rider 155 manual Transport