Husqvarna Rider 155 manual Technical Data, Dimensions, Engine, Noise emissions and cutting width

	TECHNICAL DATA
Dimensions	Rider 155
Length incl. cutting unit	2200 mm/7.22 ft
Width incl. cutting unit	1110 mm/3.64 ft
Height	1060 mm/3.52 ft
Weight	282 kg/622 lb including Combi 103 unit
Wheel base	855 mm/2.8 ft
Track	Front 715 mm/2.34 ft, rear 625 mm/2.05 ft
Tyre size	16 x 6.50 x 8
Tyre pressure, front	60 kPa (0.6 kp/cm2/8.5 PSI)
& rear
Max. gradient	15°
Engine
Manufacture	Kohler Engines model CV15
Power	11.4/15.5 kW/h.p.
Displacement	426 cm3/26 cuin
Fuel	Min. 87 octane unleaded (Research min 90 octane)
	(Gasohol < 10% etyl alcohol or MTBE < 15% by volume)
Tank volume	7 litres/7.4 USqt
Oil	SAE 10W/30 (SAE 5W/30 below freezing point)
	class SG or SH
Oil volume	1.9 litres/1.8 USqt
Start	Electric starter
Noise emissions and cutting width
Measured noise level	100 dB(A)
Guaranteed noise level	100 dB(A)
Cutting width	1030 mm/41"
Electrical system
Type	12 V, negative ground
Battery	12 V 24 Ah, maintenance free
Spark plug	Champion RC12YC electrode gap = 1.02 mm/0.040"
Transmission
Manufacture	Tuff Torq K46
Oil	SAE 10W/30, class SF-CC
Cutting unit
Type	3-blade unit with Combi function
Cutting width	1030 mm/41"
Cutting heights	9 positions, 45-95 mm/1 3/4"-3 3/4"
Blade diameter	410 mm/16 1/4"

When this product is worn out or no longer used it should be returned to the dealer or other appropriate body for recycling.

We reserve the right to change technical specifications without prior notice.

Note that no legal claims are valid on the basis of information in this manual.

Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.

English – 45