Husqvarna Rider 155 Service position for cutting unit, Placing in service position, Maintenance

MAINTENANCE

Service position for cutting unit

The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position.

Placing in service position

1.Position the machine on flat ground. Apply the parking brake (A).

Adjust the cutting unit to the lowest cutting height and lower the cutting unit (B).

8009-437

2.Remove the front hood by removing the pin. (There are complete instructions on using the service position inside the front hood).

3.Remove the two support wheels from under the front hood.

6017-219

6017-220

36 – English