MAINTENANCE
Adjusting the throttle wire
If the engine does not respond as it should do when the throttle lever is moved or if the top speed is not reached, the throttle wire may need adjusting.
1.Loosen the clamping screw (by the arrow), and slide the throttle to the choke position.
2.Pull the throttle wire’s casing as far as possible upwards and check that the choke is fully actuated.
3.Tighten the clamping screw.
4.Pull back the throttle to the full throttle position and check that the choke is no longer actuated.
Adjust by the screw if required.
Replacement of the fuel filter
Replace the pipe fitted fuel filter every 100 running hours (once per season) or more frequently if it is clogged.
Replace the filter as follows:
1.Fold open the engine cover.
2.Move the hose clips away from the filter. Use a pair of flat pliers.
3.Pull off the filter from the hose ends.
4.Press in the new filter on the hose ends. If necessary soap solution can be applied on the filter ends to simplify fitting.
5.Push the hose clips back on the filter.
26 – English
