Husqvarna Rider 155 manual Explanation Of Symbols

EXPLANATION OF SYMBOLS

These symbols are on the machine and in the operator’s manual.

Study them carefully so that you know what they mean.

Read the operator’s manual

R N

Reverse Neutral Fast Slow Engine off Battery Choke Fuel

Oil level Cutting height Backwards Forwards Ignition

Hydrostatic free wheel Use hearing protection Parking brake Brake Warning

Never use the machine if persons, especially	Never carry passengers on the	Warning!	Never drive across a
		Risk that the
children, or animals, are in the vicinity.	machine or equipment.
		machine can tip over	slope

Keep hands and feet away from

moving parts.

STARTING INSTRUCTION

•READ OPERATOR´S MANUAL.

•CHECK ENGINE OIL LEVEL.

•ENGAGE PARKING BRAKE AND LIFT CUTTING DECK IN TRANSPORT POSITION.

•IF ENGINE IS COLD USE CHOKE.

•START THE ENGINE.

•RELEASE PARKING BRAKE BEFORE DRIVING.

INSTRUCTIONS DE DEMARRAGE

•LIRE LE GUIDE DE CONDUITE.

•VÉRIFIEZ LE NIVEAU D´HUILE MOTEUR.

•SERREZ LE FREIN DE PARKING ET METTRE LE CARTER DE COUPE EN POSITION HAUT.

•SI LE MOTEUR EST FROID, UTILISEZ LE STARTER.

•ACTIONNEZ LE DÉMARREUR.

•DESSERREZ LE FREIN DE PARKING

Drive very slowly

without the cutting unit.

Speed limiter pedal forwards

Neutral

Speed limiter pedal reverse

Switch off the engine and take off the ignition cable before repairs or maintenance

6 – English