There is no sound from the CD.

Take the following actions:

1.Check that you are using an audio CD and not a data CD.

2.Adjust the sound-adapter volume control. See the documentation that comes with your sound adapter and audio-CD player program.

3.Turn off the computer, unplug the cables from the electrical outlets for your computer and all attached devices, and remove the computer cover. Check that the audio-signal cable connects the 40X/12X/40X Max CD-RW drive to the sound adapter.

The connectors on the audio cables provided do not fit the connector on your audio adapter.

Some audio adapters might require a special cable. See the documentation that comes with your sound adapter.

You might have to purchase a separate audio cable for the 40X/12X/40X Max CD-RW drive. The audio-out connector on the 40X/12X/40X Max CD-RW drive requires a MPC-2 compliant Molex 70553 or equivalent connector. (To locate the drive audio connector, see “Back view of the drive” on page 3.) If you are using an IBM computer or IBM sound adapter, see “Service and Support” on page 25 for assistance.

You receive buffer underrunerror messages when copying

CDs or making data CDs.

Take the following actions:

vIf the file source is a network or removable device, copy the files to the local hard disk first.

vIf using CD copier, select Advanced and check the Copy to Hard Disk option.

vIf using RecordNow, select Options->Advanced, and make sure that Burn-Proof is checked.

vTry reducing the write speed.

vMake sure the source and target drives are being operated in DMA mode. See Appendix C, “Customizing the device-driver configuration settings” on page 23 for more information.

2240X/12X/40X Max CD-RW Drive: User’s Guide

Page 32
Image 32
IBM 22P6979 manual There is no sound from the CD