Enabling DMA for Windows 2000 Professional
To change the parameter setting for Windows2000, do the following:
1. Click Start Settings Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click Device Manager.
5. Click the IDE ATA/ATAPIcontroller to expand the tree.
6. Click the device that corresponds to the controller where your CD-RW Drive
is located (Primary IDE or Secondary IDE).
7. Click the Advanced Settings tab.
8. Click Transfer Mode, and select DMA if it is available.
9. Click OK.
10. Click Close to close the System Properties window.A message is displayed
informing you that the system settings have changed.
11. Click OK to restart your computer.
24 40X/12X/40X Max CD-RW Drive: Users Guide