Appendix C. Customizing the device-driver configurationsettings
Windows XP and Window Me have two device-driver configuration parameters:
Auto Insert Notify and DMA.
The Auto Insert Notify parameter enables the computer to start audio CD software
as soon as a CD is inserted into the CD-RW drive.
The DMA parameter improves computer performance by having the computer
DMA controller handle data transfers from the CD to memory, freeing the
computer microprocessor to perform more important tasks. For example, activating
DMA might make movies and games run more smoothly because the
microprocessor is allocating more processing time to video.

Changing the Auto Insert Notify and DMA parameters for Windows Me

To change the Auto Insert Notify and DMAparameter settings in Windows Me do
the following:
1. Click Start Settings Control Panel.
2. Click on view all control panel options.
3. Double-click System.
4. Click the Device Manager tab.
5. Double-click CD-ROM.
6. Click on the drive that you want to modify.
7. Click the Settings tab.
8. Click to select or to clear the Auto Insert Notification check box and the DMA
check box, depending on which parameters you want to enable or disable.
9. Click OK.

Changing the DMA parameter setting from the Windows XP desktop

To change the DMAparameter setting from the Windows XP desktop do the
following:
1. Click Start Control Panel.
2. Click Switch to classic view.
3. Double-click System.
4. Click the Hardware tab.
5. Click Device Manager button.
6. Click on the IDE ATA/ATAPIcontrollers to expand the tree.
7. Double-click on the controller that corresponds to where your CD-RW is
located (Primary IDE or Secondary IDE).
8. Click the Advanced Settings tab.
9. Select the appropriate Transfer Mode pull-down that correspondsto the
CD-RW location (Device 0 for Master, Device 1 for Slave).
10. Select DMA if Available.
11. Click OK.
© Copyright IBM Corp. 2002 23