IBM 5697-VM3 manual Page 2 of 2. DASD Storage Requirements for Target Minidisks

Figure 8 (Page 2 of 2). DASD Storage Requirements for Target Minidisks

Minidisk		Storage in
		Cylinders				Usage
owner	Default			FB-512	SFS 4K
(user ID)	Address	DASD	CYLS	Blocks	Blocks	Default SFS Directory Name
5654A09A	4E2	3390	45	64800	8100	This is the test build disk which will
		3380	54			contain the production files after the
		9345	54			service process completes. Once
						testing is complete, files must be copied
						to the production disk.
						SFS directory not recommended. (1*)
5654A09A	191	3390	1	1200	150	5654A09A user ID's 191 minidisk
		3380	1
		9345	1			VMSYS:5654A09A.

Notes:

1.An SFS directory SHOULD NOT be used for the production disk or the test build disk to avoid suspension of the ADSM server. The message repository, which is read as needed by the server, will reside on these disks. By placing the message repository in an SFS directory the ADSM Server can be suspended while the SFS Server satisfies a read request when a message text is needed.

2.Cylinder values defined in this table are based on a 4K block size. FB-512 block and SFS values are derived from the 3380 cylinder values in this table. The FBA blocks are listed as 1/2K but should be CMS formatted at 1K size. 37,650 4K blocks are needed for SFS install.

3.The list of DASD in this figure does not show all devices supported by VM/ESA and you are not limited to only these devices when installing the Tivoli ADSM for VM program product. To determine the amount of space needed on a device not listed but supported by VM/ESA, start with the value in the "SFS 4K Blocks" column.

12Tivoli ADSM for VM Program Directory