IBM 5697-VM3 Electronic Service, vmfrec info, vmfview receive, vmfsetup 5654A09A ADSM ADSMSFS

				5654A09A is the PPF that was shipped with the
				product. If you have your own PPF override you
				should substitute your PPF name for 5654A09A.
				Use ADSM for installing on minidisks or ADSMSFS
				for installing in Shared File System directories.
	5 Receive the documentation.
			Electronic Service
		If you are receiving service from ServiceLink (electronic service) see
		Appendix A, "Receiving Service for VMSES Envelopes" section 'Receive
		Service Documentation', in the VM/ESA Service Guide. Remember to
		substitute the ppfname and compname used for servicing Tivoli ADSM for
		VM in the instructions shown in the Appendix. Then return back to this
		PD and continue with step 9.
vmfrec info
				The INFO option loads the documentation and
				displays a list of all the products on the tape.
	6 Check the receive message log ($VMFREC $MSGLOG) for warning and error
		messages.
vmfview receive				Also make note of which products and components
				have service on the tape. To do this, use the PF5
				key to show all status messages which identify the
				products on the tape.
	7 Read the product memo (5654A09A MEMO) before going on. This memo
		was loaded to the A-disk.
	8 Setup the correct minidisk acess order.

vmfsetup 5654A09A {ADSM ADSMSFS}

Use ADSM for installing on minidisks or ADSMSFS for installing in Shared File System directories.

9 Merge previously applied service to ensure that you have a clean alternate APPLY disk for new service.

vmfmrdsk 5654A09A {ADSM ADSMSFS} apply

Service Instructions 29