3 Execute the profile to access MAINT's minidisks.
profile
link MAINT 51d 51d mr access 51d d
4 If the Software Inventory disk (51D) was accessed R/O (read only) then establish write access to the Software Inventory disk.
Note: If the MAINT 51D minidisk was accessed R/O, you will need to have the user who has it linked R/W link it as R/O. You then can issue the following commands to obtain R/W access to it.
5 Have the Tivoli ADSM for VM installation tape mounted and attached to 5654A09A at virtual address 181. The VMFINS EXEC requires the tape drive to be at virtual address 181.
6 Install Tivoli ADSM for VM.
Notes:
a. If you've already created a PPF override file, you should specify your override file name, in place of the default PPF name (5654A09A), after the PPF keyword for the following VMFINS command.
b. You may be prompted for additional information during VMFINS INSTALL processing depending on your installation environment. If you're unsure how to respond to a prompt, refer to the "Installing Products with VMFINS" and "Install Scenarios" chapters in the VMSES/E Introduction and Reference to decide how to proceed.
vmfins install ppf 5654A09A {ADSM ADSMSFS} (nomemo nolink
Use ADSM for installing on minidisks or ADSMSFS for installing in Shared File System directories.
The NOLINK option indicates that you don't want VMFINS to link to the appropriate minidisks, only access them if not accessed.
Installation Instructions | 23 |
